Description

This is a combination set of the top pivot and top guide typically used on a variety of wood bi-fold doors. They are both spring-loaded steel shafts set a in 7/16 in. diameter nylon housing. The 7/8 in. horizontal roller on the guide provides a smooth guiding of the lead door. The top pivot has a 1/4 in. diameter pin set in its nylon housing. To install, lightly tap them into the pre-drilled top mount holes. Used by a variety of bi-fold door manufacturers.

Used by a variety of bi-fold door manufacturers

Spring-loaded pivot pin and guide

7/16 in. outside diameter to housings

Nylon housing and rollers with steel shafts

Insert into pre-drilled top mount holes in bi-fold doors

Easy to install

No tools required for installation

For further dimensional information, please see the line drawing

Description

This is a spring-loaded 3/4 in. diameter nylon roller guide in a steel nail down base. The base is 3/8 in. with two nail down tabs on either side. It mounts on the top edge of a bi-fold door that is 1 in. to 1-3/8 in. thick and can hold up to 30 lbs. maximum.

Used by a variety of bi-fold door manufacturers

Spring-loaded base

3/8 in. base with tabs

Steel base and 3/4 in. nylon roller